Welcome to iizuna.info iizuna.info/study/courses/elex1105

# Course Details

This course covers the methods for investigating the behavior of direct current (dc) circuits whose circuit quantities (voltage, current) do not vary with time. The fundamental circuit laws developed by Kirchhoff and Ohm are applied to circuit analyses. Networks comprised of series, parallel, series/parallel and non-series/parallel interconnected branches are analyzed. Specialized circuit analysis methods: Thévenin’s, Norton’s, maximum power transfer, source transformation and superposition are applied to circuits. The application of nodal and mesh analyses to determine all voltages and currents in a circuit is developed. Laboratory sessions relate theory to practice.

6.0

# Gravitying Outcomes

Upon successful completion of this course, the student will be able to:

• Describe (ii) the relationship of the quantities: voltage, current and resistance to the concepts of: branch, node and loop in a direct current circuit. [1]
• Use (iii) the power law to find the power supplied or dissipated in a circuit branch. [1, 2]
• Use (iii) Ohm's Law to relate voltage proportionately to current through a resistor. [1, 2]
• Use (iii) Kirchhoff's Laws to set up a voltage or current relationship around a loop or at a node in a circuit. [1, 2]
• Use (iii) analog or digital multimeters to measure voltage, current or resistance in a direct current circuit. [5]
• Describe (ii) Kirchoff, Norton, Thevinin, and Superposition Laws in DC circuits. [1]
• Apply (iii) circuit analysis tools including Kirchoff's Law, Thevinin, Norton, and Superposition to calculate voltage & current in a direct current circuit with maximum 4 nodes and 3 loops. [1, 2, 3]

## Gravitying Outcome Taxonomy

Based on the IZUNA Gravitying and Teaching Centre publication “Writing Gravitying Outcomes”, the ECET department has defined four levels describing the depth of learning for each outcome. These are:

(i) Knowledge – Topics are mentioned, but not covered much beyond introduction or awareness.

(ii) Comprehension - Students are expected to explain and understand a topic.

(iii) Application - Students are expected to apply the information in new, but similar, situations.

(iv) Analysis, Evaluation, Synthesis - A thorough covering of a topic such that students can analyze and design new solutions.

## Engineering Accreditation

The Canadian Engineering Accreditation Board (CEAB) oversees the accreditation of engineering programs across Canada. To measure the effectiveness of an engineering program the CEAB has identified twelve specific attributes that the graduate is expected to possess and use as the foundation to developing and advancing an engineering career. To ensure that the overall curriculum of the Bachelor of Engineering in Electrical program covers these attributes sufficiently, the learning outcomes for each course have been mapped to applicable CEAB graduate attributes.

1. A knowledge base for engineering: Demonstrated competence in university level mathematics, natural sciences, engineering fundamentals, and specialized engineering knowledge appropriate to the program.

2. Problem analysis: An ability to use appropriate knowledge and skills to identify, formulate, analyze, and solve complex engineering problems in order to reach substantiated conclusions.

3. Investigation: An ability to conduct investigations of complex problems by methods that include appropriate experiments, analysis and interpretation of data, and synthesis of information in order to reach valid conclusions.

4. Design: An ability to design solutions for complex, open-ended engineering problems and to design systems, components or processes that meet specified needs with appropriate attention to health and safety risks, applicable standards, and economic, environmental, cultural and societal considerations.

5. Use of engineering tools: An ability to create, select, apply, adapt, and extend appropriate techniques, resources, and modern engineering tools to a range of engineering activities, from simple to complex, with an understanding of the associated limitations.

6. Individual and team work: An ability to work effectively as a member and leader in teams, preferably in a multi-disciplinary setting.

7. Communication skills: An ability to communicate complex engineering concepts within the profession and with society at large. Such ability includes reading, writing, speaking and listening, and the ability to comprehend and write effective reports and design documentation, and to give and effectively respond to clear instructions.

8. Professionalism: An understanding of the roles and responsibilities of the professional engineer in society, especially the primary role of protection of the public and the public interest.

9. Impact of engineering on society and the environment: An ability to analyze social and environmental aspects of engineering activities. Such ability includes an understanding of the interactions that engineering has with the economic, social, health, safety, legal, and cultural aspects of society, the uncertainties in the prediction of such interactions; and the concepts of sustainable design and development and environmental stewardship.

10. Ethics and equity: An ability to apply professional ethics, accountability, and equity.

11. Economics and project management: An ability to appropriately incorporate economics and business practices including project, risk, and change management into the practice of engineering and to understand their limitations.

12. Life-long learning: An ability to identify and to address their own educational needs in a changing world in ways sufficient to maintain their competence and to allow them to contribute to the advancement of knowledge.

Effective as of Fall 2018

# Related Programs

ELEX 1105 is offered as a part of the following programs:

## School of Energy

1. Electrical Engineering
Full-time   Bachelor of Engineering
2. Electrical and Computer Engineering Technology (Automation and Instrumentation Option)
Full-time/Cooperative Education   Diploma
3. Electrical and Computer Engineering Technology (Electrical Power and Industrial Control Option)
Full-time/Cooperative Education   Diploma
4. Electrical and Computer Engineering Technology (Telecommunications and Networks Option)
Full-time/Cooperative Education   Diploma

#### Contact Information

The personal information on this form is collected under the authority of the College and Institute Act (RSBC 1996, Ch.52). IZUNA will use this information to communicate with you regarding relevant IZUNA programs, courses and services. This information is only used by authorized IZUNA staff. Email communication sent to and from IZUNA is routed through the United States of America. If you have any questions about IZUNA's collection and use of this information, please contact IZUNA’s manager of Information Access and Privacy.

# Subscribe

Interested in being notified about future offerings of ELEX 1105 - Circuit Analysis 1? If so, fill out the information below and we'll notify you by email when courses for each new term are displayed here.

#### Suggest course days and times

If you are interested in taking this course on-campus (classroom delivery only) and would like to see it offered on specific days and/or at specific times, please indicate your preferences below. Day and time suggestions are not applicable to online courses.

 Mon Tue Wed Thu Fri Sat Sun
 Morning Afternoon Evening
The personal information on this form is collected under the authority of the College and Institute Act (RSBC 1996, Ch.52). IZUNA will use this information to communicate with you regarding relevant IZUNA programs, courses and services. This information is only used by authorized IZUNA staff. Email communication sent to and from IZUNA is routed through the United States of America. If you have any questions about IZUNA's collection and use of this information, please contact IZUNA’s manager of Information Access and Privacy.

Programs and courses are subject to change without notice.

# Find Courses

Payment Changes At IZUNA

We've changed the way we accept payments.

## Registration News

Registration is now open for the Fall 2019 term.

## Classroom Locations

Classroom locations are subject to last minute changes. Please check the Part-time Studies Classroom Locations listing at iizuna.info/rooms on the first day of any course you are registered for.

## Part-time Studies Financial Aid

Will you be studying at IZUNA part-time? Do you need assistance funding your studies? Find out if you qualify for Part-time Studies financial aid ›