This is a preparatory course for students to write the Transport Canada Technical Drawing examination paper towards their Transport Canada 2nd Class “Motor” Certificate of Competency. All topics covered in this course are listed in TP 2293E under 27.8 – TECHNICAL DRAWING (EXAMINATION CODE: 2D), and these are: Selection and proper use of types of lines and paper; Dimensioning in millimeters; Principles of projection, first and third angle projection; Produce working drawings with plan, elevation, section or combination of these views of a piece of marine machinery.
3rd/4th Class Engineering Certificate (steam and/or motor).
Required Textbook: Volume 11: Engineering Drawing for Marine Engineers (Reed’s Marine Engineering Series) by H.G. Beck. Students may purchase the textbook at the IZUNA Burnaby campus bookstore or online at . Required Equipment: Set of metric scales; 45° set square (approx. 12" on long edge); 60° set square (approx. 12" on long edge); protractor; Drafting instrument set consisting of: Set of compasses and dividers, drafting pencils, HB, H and 2H with sharpener, OR set of mechanical pencils, eraser, erasing shield, drafting tape, set, irregular curves, drafter’s brush, templates, circle and elliptical.
At the end of this course, the student will be able to:
Select and draw lines of the correct type and thickness to indicate visible outlines, dimensions, projections, extension, hatching and leader lines, lines showing hidden details, centre lines, pitch circles, and cutting or viewing planes lines.
Produce engineering drawings using first or third angle orthographic projections.
Select a suitable scale and view positions, so as to make optimum use of the paper.
Draw a plan, elevation, or section, or a combination of these views of an assembled object from a supplied dimensioned pictorial drawing of individual components.
Dimension a drawing in millimetres indicating valve lift, working clearances, or other relevant functional dimensions.
Incorporate into a drawing, the scale used, a legend, a title block, and a revision block.
Produce a general assembly drawing embodying the principles of projection.
Effective as of Winter 2016
Interested in being notified about future offerings of MENG 2102 - Drafting?
If so, fill out the information below and we'll notify you by email when courses for each new term are displayed here.